Adler europe AD 4084 Mode D'emploi page 4

used because that may cause fire, electrical shock or injury.
16. Do not use the appliance for other than its intended use. The blades are very sharp!
Care is needed when handling them
17. Never blend hot oil or fat.
18. Keep fingers away from moving parts.
19. Do not cover vents.
20. Do not use with wet hands.
21. Never blend bones, ice, coffee or peanuts.
22. When changing accessories, be sure that device is NOT connected to electricity.
23. Short-time operating: Use the appliance for no longer than 60 seconds and leave it
cooled down completely before using again about 3 minutes.
24. Before first use, clean the device.
25. When cleaning device, do not use aggressive detergent, it may damage the cover of
the device.
DESCRIPTION OF THE DEVICE (Fig.1)
1 – motor base
4 - tall cup – 700ml
7 - short cup – 300ml
10 - cup caps
BEFORE FIRST USE
1. Remove the protective foil and any other parts of the packaging. Wash all containers, lids and caps under running water with
dishwashing liquid.
CAUTION: Do not wash the motor base part (1).
2. Motor base part (1) gently wipe with a dry or slightly damp cloth.
USING THE DEVICE
1. Ensure that all blender elements are clean.
2. Place the ingredients in the chosen cup (4) (5) (6) or (7). All the ingredients should not exceed more than 2/3 capacity of the chosen
cup.
3. Attach the blender cutting blades (2) to the cup (4) (5) (6) or (7) by screwing them onto the cup by moving clockwise.
4. Place the chosen cup (4) (5) (6) or (7) with attached cutting blades (2) on the motor base (1).
The plastic tabs on the cup must match the grooves in the base (1). Place the cup on the base (1) so that the protrusions on the cup fit
into the grooves on the motor base (1) (Fig.2).
5. Connect the power cord to a power socket.
6. To start the blender, press down and twist the cup clockwise so the tabs go under the edge of the base (1).
7. Blender will start work automatically. Do not use the blender for longer than 60 seconds continuous operation time.
8. To turn the blender off move the cup anticlockwise to the previous position.
9. Remove the power cord from the power socket.
If you want to drink right away, you can put cup cap (10) to cover the cup edge. Or you can put the lid with a mouthpiece (9). If you want
to set smoothie aside for later put the lid on (8) and store it in the fridge.
NOTE: The device is intended for soft fruits. Before blending, first cut the fruits into pieces. Don't use hard fruits.
NOTE: The quantity of ice cubes in the cups (4) (5) (6) and (7)should be about 6-10 pieces depending on the size of the cup. Size of the
ice cube should not exceed 30*23*23mm. The ice cubes not larger than 15 x 15 mm are the best for blending. Don't crush ice when the
cup has no water inside.
GRINDER
1. Put the dry ingredients into the short cup (7). Make sure that they don't exceed 100g. Wet food is not allowed for grinding.
2. Screw the grinder blades (3) onto the short cup (7).
3. Place the cup with the attached grinder blades (3) on the motor base (1). Check if protrusions on the cup fit into the grooves on the
2 - blender blades 3 – grinder blades
5 - mug – 500ml 6 - cup – 500ml
8 - lids 9 - lid with mouthpiece
11 - non-slip feet
4