InnoCigs EGO AIO Mode D'emploi page 63

INNOCIGS EGO AIO – USING THE DEVICE
Changing the Atomizer Head
Remove the eGo AIO clearomizer cap by pressing down lightly and simultaneously unscrew the thread.
Under the clearomizer cap is the vaporizer unit including atomizer coil. For changing or cleaning, easily
unscrew the eGo AIO coil from the clearomizer cap.
Please note the following: Prior to first use, drip a few drops of your liquid on the atomizer coil and let it sit before
vaping. Please take several puffs without activating the atomizer and leave the atomizer sit for 15 minutes in the
e-liquid filled tank before use. Don't clean atomizer heads with water. Because atomizer coils are wearing parts,
they must be changed regularly.
61