BorMann PRO BCP3050 Mode D'emploi page 2

EN
For your personal safety, please read and understand these instructions before use. Please keep this manual for future reference.
GENERAL SAFETY WARNINGS
• It is the owner's and/or operator's responsibility to read all WARNINGS, operating and maintenance instructions on the product label and in the instruction
manual before operating this product.
• The owner/operator should retain the product instructions for future reference.
• The owner and/or operator is responsible for maintaining all decals or warning labels and keeping the equipment in good working order while in use.
• Ensure that all operators fully understand this manual. Safety information must be emphasised and understood before use.
• Please read and follow the safety, installation, maintenance and troubleshooting steps described within to ensure your safety and satisfactory use. The
product must be inspected in accordance with the instruction manual.
• Any person operating this product must be of sound mind and body and cannot be under the influence of any substance which may impair their vision,
dexterity or judgement.
• Protect yourself and others by following all safety instructions.
Read and understand this entire instruction manual before attempting to assemble, install, operate or maintain this product. Failure to comply
with the instructions may result in serious personal injury and/or property damage!
The following signal words are used to emphasize safety warnings that must be followed when using this product:
DANGER! Indicates an imminently hazardous situation that, if not avoided, WILL result in death or serious injury.
WARNING! Indicates a potentially hazardous situation that, if not avoided, COULD result in death or serious injury.
CAUTION! Indicates a potentially hazardous situation that, if not avoided, MAY result in minor or moderate injury.
NOTICE! Indicates important information, which if not followed, MAY cause damage to equipment.
SAFETY PRECAUTIONS
WARNING! Read, understand and follow all instructions and warnings before operating this product. Failure to do so may result in personal injury
and/or property damage and will void the warranty.
1. Always use common sense and pay particular attention to all the DANGER, WARNING, CAUTION and NOTICE statements of this manual. The safety instructions
provided are not intended to cover all possible conditions and practices that may occur when operating, maintaining and cleaning power tools.
2. Observe work area conditions. Do not use machines or power tools in damp or wet locations. Do not expose to rain. Keep work area well lighted. Do not use
electrically powered tools in the presence of flammable gases or liquids. Do not bring combustible materials near the tools. Power tools create sparks, which
may ignite the dust or fumes. Keep work area clean and well lit. Cluttered work areas invite accidents.
3. Wear personal protective equipment. Depending on application, use face shield, safety goggles or safety glasses as appropriate, wear dust mask, hearing
protectors, gloves and workshop apron capable of stopping small abrasive fragments. The eye protection must be capable of stopping flying debris generated
by various operations. The dust mask or respirator must be capable of filtering out particles generated by your operation. Prolonged exposure to high intensity
noise may cause hearing loss.
4. Keep bystanders, children and visitors away while operating this product. Distractions can cause you to lose control. Anyone entering the work area must
wear personal protective equipment. Fragments of workpiece or of a broken accessory may fly away and cause injury beyond immediate area of operation.
5. Stay alert. Watch what you are doing, and use common sense when operating this product. Do not use this product while tired or under the influence of
medication, alcohol, or other substances. A moment of inattention while operating this tool may result in serious personal injury. Keep proper footing and
balance at all times.
6. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry or long hair can
be caught in moving parts.
7. Work safely. Operate tool a safe distance from yourself and others in the work area. Do not run the power tool while carrying it at your side. Accidental
contact with the spinning accessory could snag your clothing, pulling the accessory into your body. Never lay the power tool down until the accessory has come
to a complete stop. The spinning accessory may grab the surface and pull the power tool out of your control. Keep proper footing and balance at all times. Do
not overreach, especially on ladders. Be certain ladders being used are sturdy, stable, on a firm surface and erected as safe working angles. Do not reach over
or across running machines, hoses, cords, etc.
8. Inspect before every use; do not use if parts are loose or damaged.
9. Do not alter this product in any way.
10. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. Do not use a tool whose
performance is not adequate for your work. Do not modify this tool and do not use this tool for a purpose for which it was not intended.
2
WWW.NIKOLAOUTOOLS.COM