Publicité
Les langues disponibles
Les langues disponibles
Roomside Fan Installation
WARNING: Disconnect all AC Power Breakers or Fuses before attempting
to cut into your ceiling.
1.) Place provided sheetrock cutout TEMPLATE on ceiling where you wish the fan
to be (DAMPER and electrical positions shown on TEMPLATE). Mark around the
edge of the TEMPLATE. Remove TEMPLATE, then cut access opening along the
line.
mark sheetrock cutout line
tracez la ligne de découpage de la plaque de plâtre
2.) Remove DAMPER from HOUSING. Attach DAMPER to 10.2 cm (4 in) ducting.
Use a length of flex ducting, 61 cm (2 ft) maximum. Hide DAMPER and ducting in
ceiling, placing DAMPER next to where it will later be reattached to the HOUSING.
ceiling
HOUSING
3.) Disconnect electrical plug from HOUSING. Remove 3 MOTOR screws. Lift
MOTOR out of metal HOUSING, then set MOTOR aside for later.
electrical plug
CUTOUT TEMPLATE AND
FAN BOX MOUNTING INSTRUCTIONS
INSTRUCTIONS DE MONTAGE
DU GABARIT DE DÉCOUPAGE ET DU
BOÎTIER DU VENTILATEUR
Need Help?
Watch our Easy Installation Video at
Avez-vous besoin d'aide?
Regardez notre vidéo d'installation facile à
DAMPER
Mark around edge of
TEMPLATE with pencil.
flex ducting
Attach DAMPER to flex
ducting with the included
DUCT TAPE STRIP.
DUCT TAPE STRIP
MOTOR
8
HOUSING
screws
Publicité
