DewStop breeze easy F200-1W Guide D'installation page 8

Removing Your Old Switch
1.) Disconnect the electrical power supply and lock out the service
panel for the existing fan.
2.) You can install the CONTROL in any standard switch location, multi-gang or
single gang.
3.) Unscrew the face plate and your old switch.
unscrew
unscrew
4.) Disconnect your old switch from your existing wiring.
disconnect
disconnect
5.) The CONTROL comes with a single-gang decora style face plate. If you have a
multi-gang switch location and your existing wall plate does not have a decora style
switch location in the needed place, you will need to purchase a new face plate
(available in colours at most hardware stores).
disconnect
disconnect
decora style
switch
location
toggle style
switch
location
7
unscrew
unscrew