Publicité
Les langues disponibles
Les langues disponibles
Installing the Fan from
Above the Ceiling
WARNING: Disconnect the AC power before any work is done to any part of
the circuit Breeze Easy is connected to. If you do not understand this
warning, seek the services of a qualified licensed electrician.
WARNING: Copper to copper only. Do not use aluminum wire.
WARNING: Follow all local electrical and safety codes, and NEC (National
Electrical Codes).
CAUTION: If your house wires do not match these colors, determine what
each house wire represents before connecting. You may need to consult a
licensed electrician to determine this safely.
1.) Attach conduit with wiring from CONTROL to HOUSING. Open the electrical
enclosure inside the fan HOUSING and connect wiring using the provided WIRE
NUTS, matching wire colours as shown:
green / green / yellow
WARNING: Disconnect all AC Power Breakers or Fuses before attempting
to cut into your ceiling.
2.) From the roomside, place provided sheetrock cutout TEMPLATE on ceiling
where you wish the fan to be (DAMPER and electrical positions shown on
TEMPLATE). Mark around the edge of the TEMPLATE. Remove TEMPLATE, then
cut access opening along the line.
mark sheetrock cutout line
tracez la ligne de découpage de la plaque de plâtre
CUTOUT TEMPLATE AND
FAN BOX MOUNTING INSTRUCTIONS
INSTRUCTIONS DE MONTAGE
DU GABARIT DE DÉCOUPAGE ET DU
BOÎTIER DU VENTILATEUR
Need Help?
Watch our Easy Installation Video at
Avez-vous besoin d'aide?
Regardez notre vidéo d'installation facile à
white / white
black / back
Mark around edge of
TEMPLATE with pencil.
11
WIRE
HOUSING
Qty:3
conduit (power
from CONTROL)
NUT
Publicité
