emerio HP-118932.1 Mode D'emploi page 5

HP-118932.1
1. Hotplates
2. Indicator lights
3. Adjustable temperature control dials
4. Handles
Assembly: Attach the two handles onto the two sides of the appliance. Fix with the four screws provided with the
handles. See above picture.
HOW TO USE YOUR HOT PLATE
Before using your hot plate for the first time, turn the hot plate to the highest setting (MAX) for 3 to 5 minutes.
This should be done when there is no cooking utensil on the hot plate.
1. Put the hotplate on a flat, dry and heat resistant surface.
2. Turn temperature control dial to "OFF".
3. Put the plug into a suitable power outlet.
4. Turn temperature control dial to "MAX"; the appliance begins to work.
5. You can also adjust the control dial to your desired setting during cooking. The indication light at the front of
appliance will turn off when the hot plate reaches the temperature.
6. The heating element will begin to heat immediately. Do not touch the metal surfaces while in use, these parts
will become hot.
7. After use, unplug the power cord from wall outlet and allow it to cool down completely.
To keep food warm:
Turn the knob to "OFF" and food will stay warm for up to 30 minutes as the hotplate gradually cools down.
- 4 -
EN