Bigben Interactive TD94 Mode D'emploi page 14

- The recording format is preset at – MP3 bit rate : 128 KBPS, sampling rate : 44.1kHz.
- To interrupt the recording, press the " Rec " Button(14)again during recording mode.
- If both storage media(USB and SD) were inserted to the unit, system will default record to USB media.
B) Aux encoding
1) Connect the unit to other device by connecting the Aux in jack (24)
2) Set the Function knob (5) to "Phono/Aux" made and then press " Rec" Button(8).
3) The Record LED indicator (12) will light up. Now the system was ready to encoding.
4) Start playback your external device to recording to USB or SD.
5) After finish of recording, press the " Rec" Button(8)again during recording mode.
C) Track separation (by remote handset)
You can divide the recording music from Phono to USB/SD track by track during encoding. Every time
when press the "
Phono/Aux to USB/SD, the system will generate a new track and continue the Record LED indicator (12)
will flashing one time. It mean the unit is creating a new track successfully.
D) Track delete (by remote handset)
You can delete the current playback MP3 file from your USB/SD media, just press and hold the delete
button on the remote control during playback the current file, the Play LED indicator (13) will flash once, it
means the current already deleted and system will just to next file and continue playback.
Removing of USB / memory card
To remove the USB/Memory Card, turn off the power or switch the function mode to either Phono or Tuner
first. For USB port -- unplug it by pulling out the USB socket directly. For Memory Card –pull out the
SD/MMC card straightly without bending
Line out connection
You can connect the system to your whole Hi-Fi system by connecting the Line out Socket (23) to the
auxiliary input socket with a RCA cable(not included).
" (Track Separation )Button once at remote handset during encoding from
.
6