Veripart VPVKP4ZF1 Notice D'utilisation page 32

PROBLEM
A bad smell comes out of the
appliance.
There's a cracking sound.
There's a whistling sound.
There's a buzzing sound.
There is a clicking sound.
There's a hissing, buzzing sound.
There is a constant squeaking noise.
6.2. ERROR MESSAGES ON THE DISPLAY
ERROR MESSAGE
ER03
F1E
F3E
F4E
POSSIBLE CAUSE
Food remains were left on the cooking
zone.
The pan is made of different materials.
The cooking zone is used at a high
power level.
The pan is made of different materials.
The cooking zone is used at a high
power level.
The electrical circuits are working.
The fan is cooling the appliance.
The electrical connection is incorrect.
POSSIBLE CAUSE
The control panel is damp or there is
something on it.
The control panel is not properly
connected to the PCB.
There is a fault in the temperature
sensor of the coil.
There is a fault in the temperature
sensor of the PCB.
32
POSSIBLE SOLUTION
Press the on/off switch to switch off the
device.
Allow the appliance to cool down
completely.
Clean the appliance. Follow the
instructions in chapter 5. Cleaning and
maintenence.
The different materials of the pan do not
affect the preparation process and do
not damage the appliance. You don't
have to do anything.
The high power setting does not affect
the preparation process and does not
damage the appliance. You don't have
to do anything.
The different materials of the pan do not
affect the preparation process and do
not damage the appliance. You don't
have to do anything.
The high power setting does not affect
the preparation process and does not
damage the appliance. You don't have
to do anything.
The electrical circuits have no influence
on the preparation process and do not
damage the appliance. You don't have
to do anything.
Wait for the fan to stop running.
Remove the power cable from the
earthed socket. If the electrical
connection is incorrect, contact an
authorised service technician.
POSSIBLE SOLUTION
Clean the control panel.
Please contact customer service.