3.
INSTALLATION
Before installing the appliance, carefully review the safety information in Section 1.
3.1.
REQUIREMENTS ON THE LOCATION OF INSTALLATION
Place the appliance at a location that satisfies the following conditions:
• A flat, stable, heat-resistant and moisture-resistant surface.
• At least 65 free space on the sides of the appliance to a cabinet or wall.
• At least 65 cm of free space at the top of the appliance.
• Not in direct sunlight.
• Well ventilated.
• Not directly next to heat sources, such as heaters or stoves.
• Not above machines that emit moisture, such as refrigerators and washing machines.
• If the appliance is installed above an oven, the oven must be fitted with a built-in cooling fan.
• An earthed socket within 130 cm.
• Direct access to the earthed socket at all times.
• The earthed socket is connected to one or more separate power groups with sufficient power for the appliance and a
properly accessible isolation switch. Are one or more of the above connections missing? If so, call on a qualified technician
to install the required connections before installing the appliance.
3.2.
REMOVING PACKAGING MATERIAL AND CHECKING
WARNING!
RISK OF SUFFOCATION. Never let children play with the packaging material. Keep the packaging material out of reach of
children.
1.
Remove the packaging and packaging material from the appliance. Keep the packaging to store the device in.
2.
Check the contents of the pack using the picture in Section 3.3.Main parts. If parts are missing or damaged, please
contact Customer Service: www.coolblue.nl/en/customer-service
3.3.
MAIN PARTS
1 Glass surface
2 Ventilation opening
3 Power cord
4 Cooking zone (18 cm)
5 Cooking zone (16 cm)
6 Operating panel
1
2
4 5
6
25
3
4 5