EZiclean I-BOT Z5 Manuel Utilisateur page 52

3. Parts maintenance/ 3.1 Dust container maintenance
When servicing parts, please turn off the robot's power switch and disconnect the power supply from the docking station.
1. Remove the dust container from the robot.
4. Gently tap the filter to remove dust.
Note that the high-efficiency filter cannot be
washed, as washing would affect its ability to
filter dust.
2. Empty the contents of the dust container.
5. Clean the dust pan, primary filter a n d filter
sponge with water.
3. Remove filter.
6. Place the dust pan, primary filter and filter
s p o n g e i n a cool, well-ventilated place
to dry o u t before placing them back on the
ro ot i n direct sunlight.