GB/IE
GB
IE
SHELVING UNIT
Assembly instructions
1. Introduction ........................................................10
2. Safety .................................................................10
3. Scope of delivery (A) ........................................10
4. Technical specifications ....................................11
5. Safety information .............................................11
6. Assembly (A) ......................................................11
7. Cleaning and care instructions.........................12
8. Disposal ..............................................................12
9. Warranty ............................................................12
10. Warranty conditions .........................................12
11. Distributor ...........................................................13
12. Service address .................................................13
1. Introduction
Congratulations!
With your purchase you have opted for a high-qual-
ity product. Familiarize yourself with the product
before using it for the first time. Please read the fol-
lowing assembly instructions carefully. Only use the
product as described and for the specific areas of
application. They contain important information for
safety, use and disposal. Familiarise yourself with all
of the operating and safety information before using
the product. Keep these assembly instructions in a
safe place. Also provide all of the documentation
when passing the product on to third parties.
Explanation of symbols
The following symbols and signal words are used in
these assembly Instructions, on the product or on the
packaging.
Hereinafter, the Shelving unit will be referred to as
product.
WARNING!
!
This signal symbol/word indicates a hazard with a
high level of risk which, if not avoided, may result in
death or serious injury.
CAUTION!
!
This signal symbol/word indicates a hazard with a
low level of risk which, if not avoided, may result in
minor or moderate injury.
10
NOTE!
This signal word warns of possible property damage
or provides you with useful additional information
regarding the use.
This symbol indicates additional information.
This symbol indicates that the product should
>20KG
be lifted by a minimum of two people.
This symbol indicates interior use only.
This symbol indicates potential danger to
children.
This symbol indicates that the product is not
a climbing aid.
This symbol indicates the maximum load
max.
weight.
kg
This symbol indicates potential danger in re-
lation to electric shocks.
These symbols inform you about
the disposal of the packaging
and product.
04
LDPE
This symbol provides information about the
www.fsc.org
FSC
certificate.
®
100 %
Holz
Wood
Bois
FSC
®
C124851
2. Safety
Intended use
The product is not intended for commercial use. Dif-
ferent use or a modification to the product are not
deemed as intended use and may lead to risks, such
as injuries and damage. The distributor assumes no
liability for damage that results from improper use.
The product is exclusively suitable for interior
use.
3. Scope of delivery (A)
1 x
cover panel 1
1 x
side part 2 / 4
1 x
middle part 3
2 x
shelves 5 / 6
1 x
base 7
2 x
base frame 8
2 x
base frame connector 9
2 x
rear wall
10
14 x base frame A
14 x tappet screw B
20 x wooden dowels 6 mm C
6 x
wood screw 5 x 45 mm D
14 x threaded screw 6 x 30 mm E
1 x
Allen key 4 mm F
8 x
mounting bracket G
8 x
wood screw 3 x 14 mm H
4 x
wood screw 3 x 12 mm I
2 x
mounting bracket J
2 x
oval head screw 4 x 12 mm K
2 x
wood screw 4 x 35 mm L
dowel Ø 6 mm M
2 x
1x
assembly instructions
4. Technical specifications
Type: Shelving unit
IAN: 355567_2004
Tradix Item No.: 355567-20-A
Measurements: approx. 73.5 x 35 x 96 cm (W x
D x H)
Weight: approx. 19.2 kg
Material: wood, metal
Production date: 08/2020
Warranty: 3 Years
5. Safety information
WARNING!
!
Risk of injury and suffocation!
If children play with the product
or the packaging, they may injure
themselves or suffocate!
-
Do not let children play with the product or the
packaging.
-
Supervise children who are close to the product.
WARNING!
!
Risk of injury!
A defective product is not allowed to be
used! There is a risk of injury!
-
Do not use the product in the case of malfunc-
tions, damage or defects.
-
Significant danger can occur for the user in the
case of improper repairs.
WARNING!
!
Fatal danger!
Do not drill without checking the
intended positions for electrical, gas
or water lines first! There is a risk of fatal
injuries!
-
Damage to electrical, gas or water lines can
cause dangerous situations! Use appropriate
detectors to determine whether hidden lines are
situated in the work area.
kan
WARNING!
!
Risk of injury!
Secure the product against falling over!
There is a risk of injury!
-
It is absolutely necessary to fix the product to a
wall using the mounting brackets J
supplied.
The product could fall over and, for example, in-
jure children.
-
Place the product on a level surface.
6. Assembly (A)
1. Remove all packaging materials.
2. Check whether all parts are available and unda-
maged.
If this is not the case, notify the specified service
address.
For assembly, you will need a Phillips screwdriver
(not in the scope of supply) and an Allen key F (in
the scope of supply).
-
Assemble the product as shown in Fig. B to
Fig. G.
Fix the shelf to the wall
WARNING!
!
Risk of injury!
Check the suitability of the wall in advance
to ensure that the fastening devices can
withstand the generated forces. There is a
risk of injury!
NOTE!
To fix the product to a wall, you need a drill with a
6 mm drill bit, a Phillips screwdriver and a hammer.
Fix the product as shown in Fig. H.
-
CAUTION!
!
Risk of injury!
There is a risk of injury due to the
weight.
>20KG
- If you intend to move the product, lift it with
two people.
GB/IE
11