Know your snow blower and its controls. Be sure you (or any other operator) have read and understood the Operation Precautions
listed on page 3 of this manual. This Snowthrower conforms to applicable North American safety standards.
Key Lock/Key
Power Cord
Connector
Strain Relief
The Operation of any Snowthrower can result in foreign objects thrown into the eyes, which
can result in severe eye damage. Always wear safety glasses or eye shields before starting
your Snowthrower and while operating. We recommend Wide Vision Safety Mask for over
the spectacles or standard safety glasses, available at your authorized service dealer.
KEYLOCK – Key must be inserted and rotated for operation.
Remove key when not in use.
CONTROL BAR – Squeeze control bar for operation, release
control bar to stop operation.
STRAIN RELIEF – To attach extension cord so cord will not
stress power cord connector.
F-031061C
All manuals and user guides at all-guides.com
OPERATION
Discharge
Control Rod
Upper Handle
Tube
Bottom Handle
Tube
Motor Housing
SNOW THROWER OPERATING CONTROLS
Control Bar
Lower Handle
Grip
2 Blade Aluminum Impeller
Impeller Blades
DISCHARGE CONTROL ROD – Pull and rotate to direct snow
discharge, release and the control rod will lock into position.
IMPELLER BLADES – When operating Snowthrower impeller
blades spin to discharge snow. Replace blades when worn or
damaged.
6
Directional Discharge
Chute
Figure 6