Publicité
WARNING
Disconnect the electrical supply before servicing or cleaning the unit.
Failure to do so could result in electrical shock or personal injury from
cleaner suddenly starting.
Lower Plate
Base inferior
Plaque
inférieure
Lift Agitator Up
Inidad del agitador
Soulever l'agitateur
Electrical Shock or Personal Injury Hazard
Removing and Installing Lower Plate
Two Screws
Dos tronillos
Deux vis
Replacing Belt
+
Before servicing any parts,
disconnect vacuum from electrical
outlet.
Place paper under nozzle anytime
lower plate is removed to protect
floor.
Place handle in upright position and
turn vacuum over to expose lower
plate.
Release lower plate by removing two
(2) screws.
Remove lower plate and remove any
residue that may exist in belt area.
Reinstall lower plate by hooking front
end of lower plate into slots on front
of nozzle housing.
Press lower plate into place and
reinstall two (2) screws.
Remove lower plate.
Remove agitator by carefully lifting
out.
- 24 -
Publicité
