3. Product Overview
EN
Electric Scooter
Handlebar
Scooter Bell
Brake Lever
Headlight
Front Reflector
Stem
Quick Release Lever
Safety Lock
Wheel Motor
The illustrations in this manual are for reference only, the actual appearance shall be subject to actual product.
05
3. Product Overview
Dashboard
Bell Lever/Buckle
Dashboard
Power Button
Accelerator
Safety Lock
Quick Release Lever
Lock: When the icon lights up, it indicates that the scooter is locked. You can lock/unlock the scooter via the Mi
1
Home/Xiaomi Home app.
Bluetooth: The Bluetooth icon is always on, indicating that the scooter has been successfully connected to the
2
mobile device.
Deck
Inflation: When the inflation icon is on, it means that it is time to maintain the tires.
3
Tips: After maintenance,follow the instructions on the APP or press the brake and power key at the same time to turn
Buckle
off the inflation reminder on the dashboard.
Error Notification: When the wrench icon displays red, it indicates that the scooter has an error.
4
Tail Light & Rear
Temperature Warning: If the battery temperature is too high or too low, the thermometer icon will be on. Use or
5
Reflector
Disc Brake
charge the scooter after its battery temperature returns to the normal operating range.
Side Reflector
Speedometer: It displays the current speed when the scooter is working. When the scooter has an issue, it
6
displays an error code. When the scooter is charging, it displays the current battery level.
Riding Modes:
7
mode.
Battery Compartment
Battery Level: The battery power is indicated by 5 bars, each representing approximately 20 % of a full battery.
8
Kickstand
Power Button
Charging Port
1
2
3
4
5
is for walking mode, and its maximum speed is 6 km/h. D is for standard mode. S is for sport
Power Button: Press the button
button
for 2 to 3 seconds to turn the scooter off. When the scooter
is on, press once to turn on/off the headlight and tail light, and press
twice to change riding modes.
Note: The scooter will turn off automatically when it enters standby
mode for more than 10 minutes. The standby mode means that the
scooter is being charged or not locked when it is on and not running.
EN
6
7
8
to turn the scooter on, and hold the
06