Renkforce DS200-8M Mode D'emploi page 30

2. Explanation of Symbols
The symbol with a lightning bolt in a triangle is used where there is a health hazard,
e.g. from electric shock.
The exclamation mark in a triangle indicates important notes in these operating in-
structions that must be observed strictly.
The arrow symbol indicates that special advice and notes on operation are provided.
3. Intended Use
The multi-scanner is used to digitise photos, slides or negative film (for possible film types, see
chapter "Technical Data").
The integrated 8 mega pixel image sensor is used to photograph the templates like with a
digital camera.
The pictures are either filed in the internal memory of the multi-scanner or on an SD/SDHC
memory card (not enclosed, can be ordered separately) via a memory card slot.
An integrated colour display is used for control and easy operation.
Power is supplied either via the included mains adapter or via USB.
For reasons of safety and approval, the product must not be converted and/or changed by you.
Using the product for any other purposes than those described above may damage the product.
Improper use also may cause dangers such as short circuit, fire, electric shock, etc. Read the
operating instructions precisely and keep them. Only pass the product on to any third parties
together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
30