Publicité
Les langues disponibles
Les langues disponibles
Images are not displayed in
playback mode
No image displayed
Slides/negatives/photos are
not scanned correctly
13. Maintenance and Cleaning
• Disconnect the product from the power supply before cleaning, switch it off and pull the mains
adapter from the socket.
• Never use any aggressive cleaning agents, cleaning alcohol or other chemical solutions,
since these may damage the casing or even impair function.
• Use a dry, lint-free cloth for cleaning the product.
• Dust on the camera lens inside may be removed, e.g., with a compressed air spray.
14. Disposal
Electronic devices are recyclable and should not be disposed of in household waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
• The multi-scanner can only display images that have
been scanned by it, but no other images.
• The memory card has other folder structures (e.g. from
a digital camera). Insert a completely empty memory
card into the multi-scanner.
• Connect the multi-scanner to the power supply and
switch it on.
• Always select the correct operating mode at the multi-
scanner.
• The two sliders must both be in the same position
("FILM SCANNER" or "PHOTO SCANNER").
49
Publicité
