Bosch FSA 050 Notice Originale page 25

4. Product description
4.1 Usage
FSA 050 can either communicate via Bluetooth
with computer that has FSA 7xx/500 software
(CompacSoft[plus]) installed or be used as a stand-
alone device.
The FSA 050 is designed for the performance of
insulation analysis on electric/hybrid vehicles. Voltage,
capacitance and resistance can also be measured.
4.2 Prerequisites for operation
with CompacSoft[plus]
Computer with operating system Windows 8 or
Windows 10 and at least one vacant USB interface
for the Bluetooth USB adapter. The current version of
CompacSoft[plus] must be installed on the computer.
i
The FSA 050 has a Bluetooth transmission power
of 10 mW (Class 2) ex works. The Bluetooth class
can only be changed using the CompacSoft[plus]
software.
4.3 Scope of delivery
Designation
FSA 050
Case
Measurement leads (red/black) with
terminals (red/black)
Bluetooth USB adapter
Batteries (5x)
Calibration certificate
Remote sensor
Operating manuals
Robert Bosch GmbH
4.4
Fig. 1:
1 Red/black measurement leads
2 Red/black terminals
3 Remote sensor with test/zeroing button (TEST)
4 LCD
5 Function keys
6 Rotary switch for measurement functions
7 Rubber cover
4.4.1
Order number
The remote sensor can be used instead of the red
– measurement lead. For insulation analysis, <TEST>
1 685 438 640
on the remote sensor has the same function as
1 684 430 075
<TEST> on the FSA 050.
The resistance of the black measurement lead and
–
the remote sensor can be zeroed for resistance
–
measurement (Ω).
–
1 684 430 074
Insulation analysis procedure with remote sensor:
1 689 979 922
1. Connect the black measurement lead to the black
1 689 989 102
negative socket of the FSA 050.
2. Connect the remote sensor to the 3-pin red
positive socket of the FSA 050 (instead of the red
measurement lead).
3. Connect the black measurement lead and the
remote sensor to the circuit to be tested.
4. Select the correct range (50 V, 100 V, 250 V, 500 V
or 1kV).
5. Press and hold <TEST> on the remote sensor.
� Insulation analysis is performed.
6. To terminate insulation analysis, release <TEST> on
the remote sensor.
Product description | FSA 050 | 25 |
Description of device
1
3
4
5
6
7
FSA 050
Remote sensor
1 689 989 102
en
2
|
2022-07-24