Publicité
Les langues disponibles
Les langues disponibles
6. Use a drill to drill holes (Ø 8mm)
5cm deep at the positions marked
(fig. D).
7. Use a hammer to secure the
support post firmly by hammering
the anchor bolts into the pre-
drilled holes.
Important: Be sure to align the
support post correctly.
8. Tighten the anchor bolts securely
using a spanner.
Opening the awning
(fig. E)
1. Grasp the handle (1a) and pull it
towards the support post.
2. Snap the latch (1b) (below the
handle) into the recess that is
provided on the support post.
3. Snap the awning rod onto the pin
(2a) on the support post
Closing the awning
(fig. E)
1. Grasp the handle, pull it back,
and raise it. Follow the groove
to unlatch the handle and the
support post.
2. Hold the handle and move it back
to the side awning. Move the
handle slowly and horizontally.
The material pulls back by itself
into the side awning.
Storage, cleaning
When not in use, always store the
product clean and dry at room tem-
perature. Clean only with water and
wipe dry afterwards with a cloth.
IMPORTANT! Never clean the prod-
uct with harsh cleaning agents.
Leave the product open to dry.
Maintenance
• I nspect the product regularly for
signs of wear and damage to
guarantee safe and risk-free use. If
any damage is found, commission
a specialist company with the
repair.
• U se only replacement parts
authorised by the manufacturer.
Disposal
Dispose of the product and
packaging materials in ac-
cordance with current local
regulations. Store the packaging
materials (foil bags, for example)
out of the reach of children. For
further information about disposal of
the product no longer needed,
contact your local council. Dispose
of the product and the packaging in
an environmentally friendly manner.
The Recycling Code distin-
guishes different materials to
be returned for recycling.
GB/IE
19
Publicité
