Publicité
Enclosure Details
1.
Parameters listed are for conventional applications only, for further help please
call Audio Tech Support.
2.
At least 0.75" MDF (Medium Density Fiberboard) is recommend for any XTR
enclosure.
3.
Recommended enclosures are NET box volumes, speaker and port displacement
are calculated into the volume of the enclosure, you will not need to add these
volumes to calculate GROSS volume for the enclosure.
Notes
*
Due to the high power capabilities and long excursion of the XTR woofers, the
Thiele/Small Parameters were calculated and measured using a Klippel analyzer
system.
** Energy Bandwidth Product (EBP) is determined by the following formula Fs/
Qes=EBP. EBP values of 50 and lower suggest a sealed enclosure is best, 50 to90
means the subwoofers versatile and 90 and above mean vented Enclosure is
recommended.
*** Subsonic filter should always be used and adjusted specifically for vented box
designs.
XTR102
Dimensions inches/mm, Dimensions po/mm, Dimensiones plg./mm, Abmessungen Zoll/mm,
Dimensioni pollici/millimetri, Dimensões polegadas/mm
A
5.00/127
B
1.97/50
C
5.91/150
D
9.10/230
E
10.40/264
16
A
B
XTR104
XTR122
5.00/127
5.99/152
1.97/50
2.32/59
5.91/150
5.95/151
9.10/230
10.91/277
10.40/264
12.25/311
C
D
E
Figure 13
Figura 13
Abbildung 13
XTR124
5.99/152
2.32/59
5.95/151
10.91/277
12.25/311
© 2008 directed electronics—all rights reserved
XTR152
XTR154
7.25/184
7.25/184
2.32/59
2.32/59
5.91/150
5.91/150
13.59/345
13.59/345
15.13/384
15.13/384
Publicité
