Canon PIXMA MX300 Guide De Démarrage Rapide page 40

5
Insert a new FINE Cartridge all the way into
the appropriate slot.
The Black FINE Cartridge should be installed into
the left slot ( ) and the Color FINE Cartridge
B
should be into the right slot (
6
Push up the FINE Cartridge until it clicks into
place.
7
Lift the Scanning Unit (Printer Cover) slightly to set the Scanning Unit Support back
to its original position, and then gently close the Scanning Unit (Printer Cover).
Note
If you have pressed the Stop/Reset button for at least 5 seconds when "CHECK INK", "BLK INK
VOL UNKNOWN", or "COL INK VOL UNKNOWN" appears on the LCD, note the following.
When ink runs out, printouts will become faint or blank printouts will be printed.
When receiving faxes, the machine will not store it in its memory even if the ink level becomes low
or run out.
36 Replacing a FINE Cartridge
C ).
B C