Changing The Operating Mode - AERMEC AER503IR Manuel D'utilisation Et D'installation

CHANGING THE OPERATING SETPOINT
Main
In the AER503IR thermostat the work setpoint ranges vary based on the operating mode (summer/winter) and are shown in the following table:
Min. [°C]
17.0
12.0

CHANGING THE OPERATING MODE

The AER503IR thermostat has 5 different modes for fan coil control (AUTO, V1, V2, V3, AUX) and can be selected as indicated by the figure below:
22
Select the setpoint
display
Confirm
setpoint
Pressing the MODE/SELECT button
changes the thermostat operating mode.
menu
Setpoint menu display
Max. [°C]
33.0
28.0
Pressing the ON/OFF button turns off
the thermostat.
Change
setpoint
Operating mode