Publicité
Les langues disponibles
Les langues disponibles
Hints and Tips
Problem
The induction
hob cannot be
turned on.
The touch
controls are
unresponsive.
The touch
controls are
difficult to
operate.
The glass is
being
scratched.
Some pans
make crackling
or clicking
noises.
The induction
hob makes a
low humming
noise when
used on
a high heat
setting.
Fan noise
coming from
the induction
hob.
Possible causes
No power.
The controls are locked.
There may be a slight film of
water over the controls or you
may be using the tip of your
finger when touching the
controls.
Rough-edged cookware.
Unsuitable, abrasive scourer or
cleaning products being used.
This may be caused by the
construction of your cookware
(layers of different metals
vibrating differently).
This is caused by the
technology
of induction cooking.
A cooling fan built into your
induction hob has come on to
prevent the electronics from
overheating. It may continue to
run even after you‟ve turned the
induction hob off.
What to do
Make sure the induction hob is
connected to the power supply
and that it is switched on.
Check whether there is a power
outage in your home or area. If
you‟ve checked everything and the
problem persists, call a qualified
technician.
Unlock the controls. See section
„Using your induction cooktop‟ for
instructions.
Make sure the touch control area is dry
and use the ball of your finger when
touching the controls.
Use cookware with flat and smooth
bases. See „Choosing the right
cookware‟.
See „Care and cleaning‟.
This is normal for cookware and
does not indicate a fault.
This is normal, but the noise should
quieten down or disappear completely
when you decrease the heat setting.
This is normal and needs no action. Do
not switch the power to the induction
hob off at the wall while the fan is
running.
EN-21
Publicité
