Publicité
Les langues disponibles
Les langues disponibles
Operation and Maintenance
A . Installation
The wall mount installation should be set
so the top of the wall mount is 113 cm
(44 1/2 in)from the floor.
CAUTION
• The wall mount's mounting screws must be
affixed to a hard wall or underlying wall stud.
- If you install the wall mount into drywall
and there is no stud present, use the
drywall anchors to secure the charger.
NOTE
• Please refer to the QR code for
detailed information on the
installation of the wall mount.
B. Using the Vaccum cleaner
B-1 Charging
• When the battery level indicator is at its
lowest level and blinks charge the battery.
• When charging the vacuum, make sure
the connection part of the wall mount is
correctly connected.
• The vacuum cleaner cannot be used
while it is charging.
• Using the wall mount
- Make sure the back of the battery is correctly
placed onto the vacuum charging part.
- Check if the battery level indicator is
displayed while charging.
- The battery level indicator blinks while
charging. When charging is complete, the
blinking stops and the light level dims.
• Charging with a desk charger
- Charge the battery at the desk charger.
- Push the battery in firmly.
- Check if the battery level indicator is
displayed while charging.
CAUTION
• Before ejecting the battery, the product
must be turned off. (If the battery is forcibly
ejected while the vacuum is operating, the
vacuum can malfunction.)
• Be careful not to drop the battery. If you do,
you can injure yourself or damage the battery.
B-2 Ejecting the battery &
Re-inserting the battery
• Press the battery release button at the rear
of the handle to eject the battery.
• Push the battery to the end until you hear
it click.
B-3 Storing the accessories
• When accessories are disassembled to be
stored, dust may fall from the suction part
of the vacuum cleaner.
• After cleaning, operate in MAX mode for
10 seconds.
• Place the desk charger on a desk after
folding the accessory holders and assemble
the accessories to the holders as shown in
the picture.
• If the Extension Crevice Tool is inserted
first, the accessory holders can be folded
more easily.
B-4 Operating the vacuum cleaner
• A : Power button
- When pressing the power button, the vacuum
cleaner starts operation in 'MID' mode.
• B : Suction power control button
- You can control the suction power of
the vacuum cleaner.
- [ + ] button : Increases suction power.
- [ - ] button : Decreases suction power.
English
9
Publicité
