Publicité
Les langues disponibles
Les langues disponibles
WORKING HINTS FOR YOUR CIRCULAR SAW
Always use a blade suited to the material and material thickness to be cut. The quality of cut will
improve as the number of blade teeth increase. Always ensure the work-piece is firmly held or
clamped to prevent movement. Support large panels close to the cut line. Any movement of the
material may affect the quality of the cut. The blade cuts on the upward stroke and may chip the
uppermost surface or edges of your work piece when cutting, ensure your uppermost surface is
a non visible surface when your work is finished.
MAINTENANCE
Remove the battery pack from the tool before carrying out any adjustment, servicing or
maintenance.
There are no user serviceable parts in your power tool. Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place.
Keep the motor ventilation slots clean. Keep all working controls free of dust.
7- Recycling / WEEE
Waste electrical products must not be disposed of with household waste. Please recycle
where facilities exist. Check with your local authorities or retailer for recycling advice.
Li-Io
ORIGINAL INSTRUCTIONS
42
SAFETY AND OPERATING MANUAL
Publicité
