Publicité
SCANNING 127 AND 110 FILM WITH THE
AND
DIGITALIZA MAX
The
DigitaLIZA+
using the 120 Film Holder built into the Backlight Panel, and 110 films
using the 110 Film Mask add-on.
Loading 127 film into the 120 Film Holder [B]
1. Open the 120 Film Holder Cover [B1] of the 120 Film Holder [B].
2. Install the 127 Film Mask [B7] on top of the Light Panel [B3].
3. Put the 127 film into the 120 Film Holder [B] with 127 Film Mask [B7]
attached and close the 120 Film Holder Cover [B1] to secure the film.
4. To adjust the position of the film frame, repeat steps 1-3.
5. Follow the steps in the previous section for scanning using your digi-
tal camera or smartphone.
Scanning process for 110 negatives using the 110 Film Mask add-
on [D]
1. Clip your 110 Film Mask [D] onto the space on the 120 Film Holder
Cover [B1].
2. Open the 110 Film Mask [D], put your 110 negative into the Film
Mask and close the Film Mask to secure the film.
3. To adjust the position of the film frame, slide the negative from either
side without opening the Film Mask.
4. If you wish to cover the film border and achieve faster scanning with
more accurate color balance, the 110 Frame Cover [D1] can be added
before you insert your negative. To insert this correctly, ensure the
notch on the right side at the top lines up with the notch on the 110
Film Mask [D].
5. For scanning with a smartphone or digital camera, follow the same
process as for your 35 mm and 120 negatives.
and
DigitaLIZA Max
DIGITALIZA+
both allow you to scan 127 films
11
Publicité
