Singing Machine ISM9010 Mode D'emploi page 9

Connections
Connecting the Microphone(s)
u
v
Connecting to Line Out Jack
Energy Saving (Auto Power System-APS)
This unit will automatically turn to Screen Saver mode after 15 minutes of inactivity, and automatically
turn off after 10 minutes. The unit can be powered back on by pressing the
once. APS is for energy saving purposes.
NOTE: You can change the energy saving setting in the Screensave option, see the section of Application.
Power consumption in standby mode(s) 0.406W
Connect the wired microphone (not included)
into Mic jack
This unit can be connected to another audio
system for greater audio output via 3.5mm
AUX cord (not included).
Plug one end of AUX cord into the Line Out
jack located on the rear of the machine.
Plug the other end of the AUX cord into
the Line In jack on your separate audio
device. You may need to refer to the
instructions of your separate audio device
AUDIO
for more details.
OUTPUT
— E8 —
u v
or (when desired).
(ON/STANDBY) button