Connections
Changing the Wireless Microphone's Battery
BATTERY PRECAUTIONS
The precautions below should be followed when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment. A
reversed battery may cause damage to the device.
3. Do not mix different types of batteries together (e.g.
Alkaline, Rechargeable and Carbon-zinc) or old batteries
with fresh ones.
4. If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge a battery not intended to be
When the wireless mic batteries are low the
battery indicator will flash. Change the batteries
as follows:
WARNINGS:
• Ensure the wireless mic is turned off before
removing the batteries.
• Follow the steps outlined in the manual for
safely removing the batteries.
1
Slide the battery door in the direction
the arrow indicates to reveal the battery
compartment.
2
Replace the batteries with 2 x "AAA" size/
LR03 Alkaline battery.
3
Replace cover tightly before operating.
recharged; it can overheat and rupture. (Follow the battery
manufacturer's directions.)
6. Rechargeable batteries are to be removed from the
product before being charged.
7. Rechargeable batteries are only to be charged under adult
supervision.
8. Exhausted batteries are to be removed from the product.
9. Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
— E6 —