Electrolux GT223 Notice D'utilisation page 57

Problem
7.2 Customer Service
If your appliance is still not working
properly after making the above checks,
contact the nearest Authorised Service
Centre.
To obtain fast service, it is essential that
when you apply for it you specify the
model and serial number of your
appliance which can be found either on
the guarantee certificate or on the rating
plate located on the external right side of
the appliance.
7.3 Replacing the lamp
The appliance is equipped
with a longlife LED interior
light.
It is strongly recommended
to use original spare parts
only.
Use LED bulbs (E14 base)
only. The maximum power is
shown on the lamp unit.
8. INSTALLATION
WARNING!
Refer to Safety chapters.
8.1 Positioning
This appliance can be installed in a dry,
well ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Possible cause
The FastFreeze function is
switched on.
Products to be frozen are
placed too closely to each
other.
1. Disconnect the mains plug from the
2. Replace the used lamp with a new
3. Connect the mains plug to the mains
4. Open the lid. Make sure that the
Climate
class
SN
N
ST
T
Solution
Refer to "FastFreeze func‐
tion".
Make sure that there is
cold air circulation in the
appliance.
WARNING!
Do not remove the lamp
cover at the time of
replacement. Do not operate
the freezer if the lamp cover
is damaged or missing.
mains socket.
lamp of the same power and
specifically designed for household
appliances (the maximum power is
shown on the lamp cover).
socket.
lamp comes on.
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
ENGLISH 57