Télécharger Imprimer la page

Electrolux GT223 Notice D'utilisation page 51

Congélateur coffre
Masquer les pouces Voir aussi pour GT223:

Publicité

Les langues disponibles

Les langues disponibles

FastFreeze light
3
3.2 Switching on
1. Insert the plug into the wall socket.
2. Turn the Temperature regulator
clockwise to a medium setting.
The power indicator light will light up.
If the temperature inside the
appliance is too high the
Alarm light will blink. Active
the FastFreeze function.
3.3 Switching off
Turn the Temperature regulator to the
OFF position.
3.4 Temperature regulation
The temperature within the appliance is
controlled by the Temperature Regulator
situated on the control panel.
To operate the appliance, proceed as
follows:
• to obtain the minimum coldness, turn
the Temperature regulator towards
.
• to obtain the maximum coldness, turn
the Temperature regulator towards
.
A medium setting is
generally the most suitable.
4. DAILY USE
WARNING!
Refer to Safety chapters.
FastFreeze switch and Alarm reset
4
However, the exact setting
should be chosen keeping in
mind that the temperature
inside the appliance
depends on:
• room temperature
• how often the lid is
opened
• the quantity of food
stored
• the location of the
appliance.
3.5 High temperature alarm
An increase in the temperature in the
freezer (for example due to a power
failure) is indicated by switching on of the
Alarm light and sounding of buzzer.
The buzzer can be switched off by
pressing the Alarm reset switch.
During the alarm phase, don't place food
inside the freezer.
When normal conditions are restored,
the Alarm light will switch off
automatically.
3.6 FastFreeze function
The FastFreeze function accelerates the
freezing of fresh food and, at the same
time, protects foodstuffs already stored
from undesirable warming.
Activate the FastFreeze function at least
24 hours before placing the food to be
frozen in the freezer compartment.
To activate the FastFreeze function,
press the FastFreeze switch.
The FastFreeze light will light up.
This function stops automatically after 52
hours.
It is possible to deactivate the function at
any time by pressing FastFreeze switch.
The FastFreeze light will switch off.
ENGLISH
51

Publicité

loading