Publicité
Les langues disponibles
Les langues disponibles
Initial Operation
Battery pack:
Charge the battery pack before use (1). If performance diminishes,
recharge the battery pack.
The ideal storage temperature is between 10°C and 30°C.
"Li-Power" li-ion battery packs have a capacity and signal indicator: (2)
- Press the button (3), the LEDs indicate the charge level.
- If one LED is flashing, the battery pack is almost flat and must be
recharged.
Removing the battery pack:
Press the battery pack release (4) button and pull the battery pack (1)
forwards.
Inserting the battery pack:
Slide in the battery pack (1) until it engages.
Rotating battery pack:
The rear section of the machine can be rotated 270° in three stages, thus
allowing the machine's shape to be adapted to the working conditions. Only
operate the machine when it is in an engaged position.
Switching on and off
Switching on:
Push the slide switch (5) forward. For continuous activation, now tilt
downwards until it engages.
Switching off:
Press the rear end of the slide switch (5) and release.
In continuous operation, the machine continues running if it is forced
out of your hands. Therefore, always hold the machine with both
hands using the handles provided, stand in a safe position and
concentrate.
Tool Change
Mounting the base plate and the scratch disk:
Place the base plate or the scratch disk onto the head spindle and secure it
with the help of the provided screw.
Mounting the work disk:
Place the work disc centrally onto the Velcro plate.
The entire disk must cling to the Velcro plate to ensure that the disk is
attached securely.
14
Publicité
