EIBENSTOCK EPG 300 A Notice Originale page 13

Do not use the machine when one part of the housing is damaged.

Check the accessories before use; do not use damaged products.

Before use, make sure that the tool is correctly fixed and fastened.

Let it run idle for about 30 seconds in a safe position. If considerable

vibrations occur or if other defects are recognised, switch off
immediately.
Power tools have to be inspected by a specialist in regular intervals.

Do not touch rotating parts.

Persons under 16 years of age are not allowed to use the machine.

While working, wear ear protectors, a dust mask and protective

goggles.
Make sure that the persons standing in the work area are not hit by

particles which fly around.
Keep the handles dry, clean and free of oil and grease.

During operation always hold the machine with both hands.

Caution! The tool still runs for a little while after the machine was

switched off.
Remove the battery pack from the machine before any adjustment,

conversion, maintenance or cleaning is carried out.
Make sure that the machine is switched off when inserting the battery

pack.
Safety instructions for battery packs:

Protect battery packs from water and moisture!

Do not expose battery packs to naked flame!

Do not use faulty or deformed battery packs!

Do not open battery packs!

Do not touch or short-circuit battery packs!

Slightly acidic, flammable fluid may leak from defective Li-ion battery

packs! If battery fluid leaks out and comes into contact with your skin,
rinse immediately with plenty of water. If battery fluid leaks out and
comes into contact with your eyes, wash them with clean water and
seek medical attention immediately.
Transport of li-ion battery packs:

The shipping of li-ion battery pack is subject to laws related to the

carriage of hazardous goods (UN 3480 and UN 3481). Inform yourself
of the currently valid specifications when shipping li-ion battery packs. If
necessary, consult your freight forwarder. Certified packaging is
available from EIBENSTOCK. Only send the battery pack if the housing
is intact and no fluid is leaking. Remove the battery pack from the
machine for sending. Prevent the contacts from short-circuiting (e.g. by
protecting them with adhesive tape).
Switch the machine off if it stops for whatever reason. This way you

For further safety instructions, please refer to the enclosure!
13