Publicité
Les langues disponibles
Les langues disponibles
Multi Screen Function
PIP displays two separate pictures on screen. Your television has 2-Tuner PIP, meaning you
can view pictures from two different channels simultaneously. A special set of PIP control
buttons are located on the upper part of the remote control. Descriptions of each button
appear on this page.
Cable Box Note:
The 2–Tuner Multi Screen function may not operate when used with certain cable boxes.
This is because while some models of cable boxes may receive up to 181 channels, and
may only send the signal from one channel to your television. (Please refer to diagram on
page 12). For the 2–Tuner Multi screen function to operate correctly, it must have access
to all available channels. Since the television is receiving the signal from only one channel
from the cable box, it is impossible for the 2–Tuner Multi screen function to display a second,
different channel. Because there are many different models of cable boxes in use today,
if you are having problems operating your 2–Tuner Multi screen function feature with your
cable box, we recommend you contact your local cable company for connection advice.
PIP/Move
Turn PIP on by pressing the P
��
��
��
��
P
/M
IP
OVE
Each press of P
Note:
• You cannot select the component input in the PIP mode. (Except if the input is a 525i
component signal).
• When you select the AUTO TUNER SETUP, CHANNEL SUMMARY, V-CHIP, the PIP window
turns off.
IP
/M
will shift the PIP window to a different corner and turn off.
IP
OVE
��������
��������
���������
��������
Button Functions
/M
button
OVE
��������
��������
��������
��������
���������
��������
��������
47
Publicité
