JVC I'Art Pro AV-36DF74 Guide De L'utilisateur page 25

Search Codes
Cable/Satellite Search Codes Function
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press and hold down the P
three seconds.
3) Release the R
ETURN
4) Press the P
OWER
5) If there was a response, press R
response, repeat Step 4. If you repeat Step 4 a total of 80 times without a response, use
the remote control that came with your equipment.
6) Press R +/TV to exit.
ETURN
VCR/DVD Search Codes Function
1) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "VCR" or
"DVD".
2) Press and hold down the VCR or DVD P
more than three seconds.
3) Release the R
ETURN
4) Press the VCR or DVD P
5) If there was a response, press R
response, repeat Step 4. If you repeat Step 4 a total of 80 times for the VCR (40 times for
the DVD player), and there is no response, use the remote control that came with your
equipment.
6) Press R +/TV to exit.
ETURN
Remote Programming
button, then press the R
OWER
+/TV button, then release the P
button on the remote, and see if the cable or satellite box responds.
ETURN
+/TV button, then release the VCR or DVD P
button, and see if the VCR or DVD responds.
OWER
ETURN
ETURN
button.
OWER
+/TV. The codes are now set. If there was no
button, then press the R
OWER
+/TV. The codes are now set. If there was no
+/TV button for more than
+/TV button for
ETURN
button.
OWER
25