JVC I'ART AV-36FA54 Guide De L'utilisateur page 46

Les langues disponibles

Button Functions

PIP Introduction

AV-36FA54, AV-32FA54, AV-27FA54 ONLY.

PIP displays two separate pictures on screen. Your television has 2-Tuner PIP, meaning you

can view pictures from two different channels simultaneously. A special set of PIP control

buttons are located on the upper part of the remote control. Descriptions of each button

appear on this page.

The 2-Tuner PIP function may not operate when used with certain cable boxes. This is

because while some models of cable box may receive up to 181 channels, they may only

send the signal from one channel to your television (please also see diagram on page 12).

For the PIP tuner to operate correctly, it must have access to all available channels. Since

the television is receiving the signal of only one channel from the cable box, it is impossible

for the 2-Tuner PIP to display a second, different channel.

Because there are many different models of cable boxes in use today, if you are having

problems operating your PIP feature with your cable box, we recommend you contact your

local cable company for connection advice.

On/Move

Turn PIP on by pressing the O

��

OVE

Each press of O

Note:

• You cannot select the component input in the PIP window.

• When you select the AUTO TUNER SETUP, CHANNEL SUMMARY, V-CHIP, the PIP window

turns off.

Cable Box Note

will shift the PIP window to a different corner and turn off.

OVE

��

button

OVE

��