JVC I'ART AV-36FA54 Guide De L'utilisateur page 41

Return +
The R + button has two functions:
ETURN
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the channels
using the CH+ and CH– buttons.
R + and hold for three seconds
ETURN
The channel currently active has been programmed as your return+ channel. Now scan through
R +
ETURN
• To cancel your Return+ channel, press and hold the R
message "RETURN CHANNEL CANCELLED!" will appear.
• Return+ works only with the CH+/– buttons. Pressing any number key will cancel Return+.
Input
Selects the signal input source for the television: TV (for Antenna or Cable) or Video-1, 2, or
V2-Component, Video-3 or Video-4 (Component) for video devices like VCR's, DVD players, or
camcorders.
Press the I
AV-36FA54, AV-32FA54 and AV-27FA54 ONLY
�� �������
��
AV-36FA44, AV-32FA44, AV-27FA44, AV-36F704, AV-32F704 and AV-27F704 ONLY
��
��
Note:
• You can also access the input menu screen by using the M
instead of the remote control. It appears between INITIAL SETUP and PICTURE ADJUST
screen. Choose the INPUT by pressing M
INPUT by using the C
��������������
the channels using the C
You will return to your programmed channel.
button
NPUT
�������
������� �������
������� �������
������� �������
+/- buttons (
HANNEL
Button Functions
�����������
+/– buttons.
HANNEL
ETURN
������������
������������
������������
������������
† on the front panel and select TV or VIDEO
ENU
√ ®
OPERATE
+ button for three seconds. The
������� �������
�������
�������
�������
button on the front of the TV
ENU
).
�������
41