Publicité
AXIS A9910 I/O Relay Expansion Module
•
All power outputs are Class 2 outputs.
•
When used with an inductive load, connect a diode in parallel
with the load to protect against voltage transients.
•
All wiring methods shall be performed in accordance with
ANSI/NFPA70, local codes and authorities having jurisdiction.
•
The wiring of the door relay is limited only inside of the
protected area.
•
Recommend to use UL recognized grounding wire, a size
of 14-16 AWG, yellow/green color. Crimp the cable on the
non-insulated wire pressure ring terminal which is being
delivered as a spare part of the product. Important to use
proper crimping tool and techniques to ensure the safety of
product and user.
•
When the Axis product has reached the end of its useful life,
dispose of it according to local laws and regulations. The
product should not be disposed of together with household or
commercial waste. See Disposal and recycling on page 3 .
•
Do not connect the Axis product to a receptacle controlled
by a switch.
Specifications
•
Operating conditions
UL 294
•
Wiring requirements
-
UL listed or R/C AWM wires that have a conductor
gauge range of AWG 22–14 shall be used.
0 °C to 50 °C (32 °F to 122 °F)
Humidity: 10–85% RH
(non-condensing)
Intended for use in UL listed
enclosure with tamper switch.
6
Publicité
