Rehasense Navigator Air Mode D'emploi page 7


Tighten the knob.

Adjust the backrest clamps (5) to the appropriate height of the backrest and tighten the bolts

Reconnect both sides of the backrest (4)

Reconnect the stabilizing strap (3), to ensure full rigidity and stability of the structure.
•
Both arm pads should be adjusted to the same height.
•
If the arm pads are correctly adjusted, the user must stand upright.
•
Always lock the stabilizing strap before applying load on the arm pads.
•
Failure to follow these warnings can result in personal injury.
Adjusting the length and angle of the push handles
 Release the handle's length locking lever (2)

Make adjustments to the desired length and angle, so it is easy and comfortable to hold the handle.

Tighten the lever.
Adjusting the angular rotation of the forearm support (optional)

Release the forearm support's locking knob (1)

Make adjustment to the desired angle to fit your personal comfort - There are 3 possible angles to
set: 0°, 22,5° and 45°

Tighten the knob.
11 / 2023
7