Publicité
Les langues disponibles
Les langues disponibles
5.
Install the oil cup back to position and screw back the 3 screws. Install the filters back to
poisiton. Hold the filter lock and push back the filter towards the oil cup. And then push it back
to position. Then the installation is done. Please refer to Pic.5.
The installation is now complete.
HOW TO REPLACE THE LED LAMP?
1. Take off the baffle fitler. Loose the screws showed on Pic 1 and take out the oil cup.
2. Use the screw driver to push the LED lamp out of the panel through the hole.Please refer to
Pic 2 below.
3. Disconnect the LED terminator and then replace it with new LED lamp. And reconnect the
terminator. Fix the new lamp back to position.
4. Install the oil cup back to position and fix the 3 screws back to position.Install the filters back
to position. Please refer to Pic.4 below.
5.
Oil cup
Led lamp
with terminator
Filter
Oil cup
Filter
Led lamp
with terminator
8
Oil cup
Filter
Publicité
