Publicité
Les langues disponibles
Les langues disponibles
Quick Setup 1
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away. This information includes basic instructions
on operating your remote control, making a simple cable/antenna and optional VCR connection
and, finally, information on programming your television's Auto Tuner.
If you have questions, or for more detailed information on any of these steps, please consult
other sections of this manual.
Step One - The Remote Control
The remote control is the key to operating your television's many great features. Before you
can operate your remote control, you first need to install the batteries (included).
Slide the cover on the back of the remote down towards the bottom of the remote control.
Insert two batteries (included) carefully noting the "+" and "–" markings, placing the "–" end in
the unit first. Slide the cover back into place.
Basic Operation
Turn the television on and off by pressing the P
button at the top right corner of the
OWER
remote.
POWER
Power Button
Key Feature Buttons
The four key feature buttons at the center of the remote can be used for basic operation of the
television. The top and bottom buttons will scan forward and back through the available chan-
nels. The right and left buttons will turn the volume up or down. These buttons are also
marked with four arrows and are also used with JVC's onscreen menu system. You will need
to use these buttons later in the Quick Setup.
The next step is to connect your television to an antenna or cable.
10
Proceed to Step Two
Publicité
