cecotec READYWARM 2070 MAX FORCE BLACK Manuel D'instructions page 37

Temperature knob
-
Turn the temperature knob clockwise to increase temperature, and anticlockwise to
-
decrease it.
5. Before switching off, it is best to leave the heater for 5-10 seconds in the cold air function.
4. CLEANING AND MAINTENANCE
Before performing any cleaning or maintenance operations on the appliance, disconnect
-
it from the mains.
A soft, damp cloth and neutral detergent are recommended for cleaning. Do not use
-
abrasive cloths or devices that may affect the appearance of the appliance. Check that the
hot air outlet and ventilation inlet are free of dust and dirt.
During cleaning, be careful not to touch the heating elements.
-
Clean the filter located in the rear part of the device. To open the filter on the back for
-
cleaning, press the top of plastic net at back.
In the event of a fault and/or malfunction of the appliance, disconnect it from the mains
-
and contact an authorised repairer.
5. TECHNICAL SPECIFICATIONS
Product reference: 08254
Product: ReadyWarm 2070 Max Force Black
Power: 1800 - 2000W
Voltage: 220-240 V~
Frequency: 50/60 Hz
08254 ReadyWarm 2070 Max Force Black
Item Symbol
Heating power
Nominal
Pnom
heat output
Minimum
heat output Pmin
(indicative)
Maximum
continuous Pmax
heat output
Value Unit Item
Type of heat input, for electric storage local
space heaters only (single select)
1.8 -
Manual heat charge control
kW
2.0 with integrated thermostat
Manual heat charge control
with room and/or outdoor
1.0 kW
temperature feedback
Electronic heat charge control
with room and/or outdoor
2.0 kW
temperature feedback
READYWARM 2070 MAX FORCE BLACK
ENGLISH
Unit
[no]
[no]
[no]
37