Publicité
Les langues disponibles
Les langues disponibles
5. Remove cutters by pulling away from drive shafts.
6. Remove on/off switch and release button by lightly prying free with a small
screw driver.
7. Slide off metal cover.
8. Remove screws holding inner plastic casing together.
9. Pry batteries free from circuit board and cut wires.
10. Dispose batteries.
CONTAINS NICKEL METAL HYDRIDE BATTERY. MUST BE
COLLECTED, RECYCLED OR DISPOSED OF PROPERLY. DO
NOT DISPOSE OF IN THE MUNICIPAL WASTE.
CAUTION: ALL RECHARGEABLE BATTERIES MUST BE RECYCLED OR
DISPOSED OF IN ACCORDANCE WITH APPLICABLE STATE AND LOCAL
REGULATIONS. DO NOT PUT IN FIRE OR MUTILATE, AS THE BATTERY MAY
BURST OR RELEASE TOXIC MATERIALS. DO NOT SHORT-CIRCUIT, AS THIS
MAY CAUSE BURNS.
Bottom
Circuit Board
FXFS2(G) IB-15500B.indd 9-10
Inner Plastic Housing
Batteries
Cutters
Protective Cover
Drive Shafts
Foil Head
FXFS2/FXFS2G CORD/CORDLESS DOUBLE FOIL SHAVER
Protective Cover
Adapter
Shaving Foil
Release Button
Cleaning Brush
Charging Socket
ON/OFF Switch
- ON (Marked "I")
- OFF (Marked "0")
LED Charging Indicator
2019/1/22 4:51 PM
Publicité
