Télécharger Imprimer la page

iRobot ADI-N1 Mode D'emploi page 6

Masquer les pouces Voir aussi pour ADI-N1:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
Using your Roomba
Positioning the Home Base
EN
Good Wi-Fi
1.5 ft (0.5 m)
both sides
4 ft (1.2 m) in front
Note:
Do not place your Home Base™ in direct sunlight. Ensure that the area
around the dock is free of clutter to improve docking performance.
WARNING: To prevent the risk of your robot falling downstairs, ensure that the
charging station is placed at least 4 feet (1.2 metres) away from stairs.
Download the iRobot Home App and connect to Wi-Fi
• Follow the step-by-step instructions to set up your Roomba.
• Set up Precision Vision Navigation™ to avoid obstacles in real time.
• Set an automatic cleaning schedule and customise cleaning preferences.
• Create smart maps to tell your robot where and when to clean.
2
For more information, visit global.irobot.com
Robot Vacuum
®
Charging Station
TM
®
Coverage
4 ft (1.2 m)
from stairs
*Objects are not to scale.
Charging
CLEAN
• Place the robot on the charging station to activate
the battery.
Note:
Your robot comes with a partial charge, but we recommend
that you charge the robot for 3 hours prior to starting the first
cleaning job.
• The robot uses a small amount of power whenever it is on the
charging station. You can put the robot in a further-reduced
power state when not in use. To put your robot into Reduced
Power Standby Mode, remove the dust bin and tap the clean
®
button 5 times. To exit Reduced Power Standby Mode, place
your robot on the charging station and tap the clean button.
For more details on this Reduced Power Standby Mode, refer
to the FAQ page on our website.
• For long-term storage, turn off the robot by removing it from
the charging station and holding down the clean button for
3 seconds with one wheel off the ground. Store the robot in a
cool, dry place.
Light Ring Spiral while charging
White Spiral: charging
Red Spiral: charging, low battery
A solid white light will indicate the battery
charge percentage of your robot
When your robot is fully charged, the
light ring indicator will intermittently
pulse white at the rear.

Publicité

loading

Ce manuel est également adapté pour:

Rve-y1