Publicité
Les langues disponibles
Les langues disponibles
Installing the appliance
2.5 mm
4 mm
1. remove all packaging and check
2. this oven is designed to fit into a
4 mm
2.5 mm
3. fit the fixing hook to the right hand side
4. fit the appliance into the kitchen
5. ensure the appliance is stable and not
carefully for any signs of damage.
350 mm high cupboard as standard.
When fitting into a 360 mm high
cupboard:- Unscrew and remove the
4 feet from the bottom of the oven.
rotate the feet 90 degrees and refit with
the long side to the front of the oven.
of the kitchen cupboard using the
instruction sheet supplied.
cupboard slowly, and without force. the
appliance should be lifted onto the fixing
hook and then lowered into place. fix
the oven on the left hand side using the
two screws provided.
leaning. ensure that a 2.5 mm gap is
kept between the cupboard door above
and the top of the frame (see diagram).
7
Publicité
