ZANKER KAM961 Notice D'utilisation page 4

Care and cleaning
Door:
to remove all trace of dirt, regularly clean both sides of the
door, the door seals and sealing surfaces with a soft, damp
cloth. Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can scratch
the surface, which may result in shattering of the glass.
oven interior:
for cleaning, wipe any splatters or spills with a soft damp
cloth or sponge after each use while the oven is still warm.
for heavier spills, use a mild soap and wipe several times
with a damp cloth until all residues are removed. Do not
remove the waveguide cover. make sure that mild soap or
water does not penetrate the small vents in the walls which
may cause damage to the oven. Do not use spray type
cleaners on the oven interior. Clean the waveguide cover, the
oven cavity, the turntable and turntable support after use.
these must be dry and free from grease. Built-up grease may
overheat and begin to smoke or catch fire.
oven exterior:
the outside of your oven can be cleaned easily with mild
soap and water. make sure the soap is wiped off with a moist
cloth, and dry the exterior with a soft towel.
Control panel:
open the door before cleaning to de-activate the control
panel. Care should be taken when cleaning the control panel.
Using a cloth dampened with water only, gently wipe the
panel until it becomes clean. avoid using excessive amounts
of water. Do not use any sort of chemical or abrasive cleaner.
turntable and turntable support:
remove the turntable and turntable support from the oven.
Wash the turntable and turntable support in mild soapy water.
4