Dogtra QL2 Manuel Du Propriétaire page 9

7. Left spring installation
Spring①
Wingnut
Spring①
2. Put the spring on the guide bar
1. Use the spring① side to hook onto
first and then work your way to the
the guide bar.
wingnut.
16
Spring②
3. Move the launcher mesh to the
left side.
Spring②
4. Use the spring② side to hook onto 5. The left spring installation is com-
the wingnut. plete.
It will require some force to put the
spring into the hole on the wingnut.
X
O
Warning!
If the hook is not fully
inserted into the nut, the spring may
fall out and cause injury.
17