6. Right spring installation
Caution
The springs should be installed only on the left plate.
Wingnut
Spring①
1. Use the spring① side to hook onto
2. Put the spring on the guide bar
the guide bar.
first and then work your way to the
wingnut.
14
4. Use the spring② side to hook onto
the wingnut.
It will require some force to put the
spring into the hole on the wingnut.
3. Move the launcher mesh to the
right side.
Spring②
5. The right spring installation is
complete.
X
O
Warning!
If the hook is not fully
inserted into the nut, the spring may
fall out and cause injury.
15