Publicité
Les langues disponibles
Les langues disponibles
UNDERSTANDING YOUR TRAINING
SYSTEM
1. HOW TO TURN THE 1900S ON/OFF
To turn the handheld transmitter on, hold down the
button on the right side of the transmitter until the LCD
screen illuminates. To turn the transmitter off, hold down
the same button on the right side of the transmitter
until the LCD screen shuts off. To turn the receiver/collar
on, hold down the on/off button until the LED indicator
turns green. To turn the receiver/collar off, hold down
the on/off button until the LED indicator turns red.
10
On/Off
Button
On/Off
Button
2. HOW THE TRANSMITTER BUTTONS WORK
1900S
The transmitter for the 1900S single dog unit has four
buttons (one on the face of the transmitter, two on the
left side and one on the right side).
Nick
Button
Constant
Button
Nick Button
The "Nick" button is located on top on the left side of
the handheld transmitter. When the "Nick" button is
pressed the receiver emits a single pulse of electrical
stimulation.
Constant Button
The "Constant" button is located on the bottom on
the left side of the handheld transmitter. Pressing the
"Constant" button gives continuous stimulation as long
as the button is pushed, for up to 12 seconds. If the
button is not released after 12 seconds, the stimulation
will automatically turn off as a safety feature. The collar
will be ready to be reactivated once the button has been
released.
On/Off
Button
Pager
Button
11
Publicité
