Publicité
Les langues disponibles
Les langues disponibles
10. HOW TO USE THE TEST LIGHT
1. Turn on the receiver/collar and place the test light over
the contact points as shown in the diagram.
2. The test light will illuminate momentarily when the
Nick stimulation button is pressed on the transmitter.
The light will stay lit as long as the Constant button is
pressed on the transmitter, up to 12 seconds.
3. When the stimulation is increased, the test light will
emit a brighter light.
24
GENERAL TRAINING TIPS
Getting started with your 1900S
Your dog must know some very basic obedience
commands before beginning training with the 1900S.
A dog learns by first being shown a command, followed
by lots of repetition over an extended period. As the
dog becomes proficient at these commands, the trainer
can introduce distractions and different locations
to strengthen them. Throw in the correct amount of
positive and negative reinforcement and you should end
up with a well-mannered dog.
Obedience training on the leash
Your dog must fully understand the obedience
commands (sit, stay, here, heel and kennel) before using
the e-collar for reinforcement of these commands.
A leash attached to a standard collar is used to "teach"
the dog the basic obedience commands (here, heel, sit,
and stay). A tug on the leash/collar is used to reinforce
the command. When the dog complies with the
command, use positive reinforcement/praise. Once the
dog understands these commands, the e-collar can be
used to reinforce them.
Beginning e-collar training
When you feel your dog understands the obedience
commands on the leash we can now start with the
electric collar training. With the dog on the leash
25
Publicité
