BH TECNOVITA Milan M900 Instructions De Montage Et Utilisation page 30

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
19.-
INTENSITY; SPEED; STRENGTH.
Press this key to adjust the intensity, speed and
strength of the automatic localised program, when
activated, the force of all the massage techniques in
the selected program will be set in a circle.
You can choose from 3 settings by pressing the
INTENSITY; SPEED; STRENGTH key.
20.-
NECK/SHOULDER,
Automatic neck/shoulder program On/Off key.
Press this key once to switch on the automatic neck
and shoulder program massage functions. Press it
again to switch off the automatic program.
21.-
BACK/SEAT
Automatic back/seat program On/Off key.
Press this key once to switch on the automatic back
and seat program massage functions.
Press it again to switch off the automatic program.
22.-
LUMBAR
Automatic lumbar region program On/Off key.
Press this key once to switch on the lumbar program
massage functions.
Press it again to switch off the automatic program.
23.-
FEET/CALVES.
Automatic foot/calf program On/Off key.
Press this key once to switch on the automatic foot
and calf program massage functions.
Press it again to switch off the automatic program.
MEMORISING PROGRAMS.-
42.-
MEMORY.-
Equipped with a user defined procedure, the
massage method can be chosen by adjusting the
combination of neck, shoulder, back, lumbar and leg
massage functions and also by adjusting the
massage time. (Massage for approximately 1-30
minutes).
Memory process operation:
A)
When the massage chair is in standby mode,
press and hold one of the MEMORY for three
seconds, the MEMORY button will flash, this means
that the massage chair is now in programming mode.
B)
When you enter programming mode, the
massage rollers move up and down to recheck your
height. After the automatic height detection, it is also
possible to adjust the height further by using the two
manual backrest up/down buttons ▲/▼ to obtain the
most comfortable type of massage. After the final
adjustment, the desired height setting will be
memorised in the MEMORY program.
C)
After
the
NECK/SHOULDER icon will flash on the LCD,
indicating the neck/shoulder massage settings. You
can adjust the time by selecting the manual up/down
control buttons for the backrest ▲/▼. And if you do
not wish to massage those parts, the massage time
will be set to 0. After setting the time, press the
TIMER/ENTER button to confirm your selection, and
the
desired
NECK/SHOULDER massage will be stored in the
MEMORY program.
After setting the time for BACK/SEAT, LOWER
D)
BACK and CALVES/FEET, press and hold the
MEMORY button for 3 seconds to complete
programming the memory. (The NECK/SHOULDER,
BACK/SEAT, LOWER BACK can be set for a
maximum
time
CALVES/FEET can be set to a maximum time of 30
minutes).
E)
Press the MEMORY button briefly to start the
user defined massage.
43.-
ARM AIR.
Air pressure in arm Start/Stop key.
The ARM/AIR air pressure On/Off key can be used in
any of the programs.
Press this key once to activate this function.
Press it again to switch it off.
44.-
SYNC/MUSIC.
The SYNC-MUSIC function allows the user to enjoy a
massage while listening to music, and the rollers will
work to the rhythm of the music to provide the user
with a total physical and mental relaxation.
Using a music transmission cable (accessory), the
user can plug in an MP3 connector (or other music
player) to the control unit and put on the earphones,
then press the "SYNC-MUSIC" button to enjoy a
fantastic massage experience.
45.-
AGE/RANGE.-
This massage chair has age settings, based on which
the user can select their corresponding age and the
massage chair will automatically choose the most
appropriate methods of massage, strength, speed,
width, all thanks to an internal microcomputer in order
to achieve the best massage.
When the massage chair is switched on, the AGE
RANGE button begins to flash, press it and use the
"▲ / ▼" button to select your age range (there are 5
age levels), then press the "Timer / Enter" button to
confirm the selected age.
Notes:
1) The other function buttons will not work until you
have selected the age range.
30
height
detection,
massage
time
setting
of
10
minutes,
the
for
whereas

Publicité

Table des Matières
loading

Table des Matières